 HomeProductsWater TreatmentPolyacrylamide

PRODUCT CATEGORIES

Polyacrylamide

(Total 54 Products)

 

Anionic Polyacrylamide/ Polyacrylamide PAM

Brand: JH

Packaging: 25kg bag

Supply Ability: 3000MT/Month

POLYACRYLAMIDE(PAM) Properties: Anionic Polyacrylamide is soluble ,and insoluble in organic solvents. It presents high polymer electrolyte characteristics in neutral and alkaline mediums. It is sensitive to salt electrolyte, and can be cross-linked...

Contact Now

PAM Polyacrylamide For Oil-Field And Drilling

Brand: JH

Packaging: 25kg bag

Supply Ability: 3000MT/Month

POLYACRYLAMIDE(PAM) Properties: PAM is used for sewage treatment, with high removal efficiency of organic matter in water, low dosage, fast sedimentation rate and low water production cost. It is an irreplaceable product for other flocculants.PAM...

Contact Now

Water Treatment Chemical Flocculant PAM

Brand: JH

Packaging: 25kg bag

Supply Ability: 3000MT/Month

POLYACRYLAMIDE(PAM) Properties: Polyacrylamide is a water- soluble high polymer.It's not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid. It is mainly used for the sludge...

Contact Now

Flocculant PAM Polyacrylamide Price CAS No.9003-05-8

Brand: JH

Packaging: 25kg bag

Supply Ability: 3000MT/Month

POLYACRYLAMIDE(PAM) Properties: Polyacrylamide is a water-soluble organic high molecular weight polymer. Polyacrylamide has good flocculation, adsorption decolorization, resistance reduction, thickening and adhesion etc characteristics.As a...

Contact Now

Cation Nonionic Anionic Polyacrylamide

Brand: JH

Packaging: 25kg bag

Supply Ability: 3000MT/Month

POLYACRYLAMIDE(PAM) Properties: PAM is White to off-white Crystalline Granular.insoluble in benzene, toluene xylene gasoline kerosene, diesel oil, but water soluble polyacrylamide with alkali reaction, partially hydrolyzed polyacrylamide, under the...

Contact Now

Flocculant PAM Granular For Waste Water Treatment

Brand: JH

Packaging: 25kg bag

Supply Ability: 3000MT/Month

POLYACRYLAMIDE(PAM) Properties: PAM is a water-soluble polymer, the appearance of a white or yellowish powder, easy to absorb water, long-term thermal decomposition, the decomposition temperature above 200 ℃, under anaerobic conditions, 210 ℃...

Contact Now

China Polyacrylamide Suppliers

Polyacrylamide (PAM) is a water-soluble polymer, which is insoluble in most organic solvents, has good flocculating properties, can reduce frictional resistance between liquids, Can be divided into non-ionic, anionic, cationic and amphoteric four types.

When PAM is used for flocculation, it is related to the surface properties of the species being flocculated, especially the potential, viscosity, turbidity, and pH of the suspension. The kinetic potential of the particle surface is the reason for particle inhibition. Can reduce the potential and condense.

Granular polyacrylamide flocculant cannot be directly added to sewage. It must be dissolved in water before use, and its aqueous solution are used to treat sewage.The water in which the particulate polymer is dissolved should be clean. Generally tap water is suitable for formulating polymer solutions. Strong ACID, strong alkali, high salt water is not suitable for preparation. Water at room temperature is ok, no necessary to heat. Dissolution is slow when the water temperature is below 5 ° C. Increasing the water temperature will accelerate the dissolution rate, but above 40 ° C will accelerate the degradation of the polymer and affect the use effect. The solution concentration is recommended to be 0.1% -0.3%.

 Home > Products > Water Treatment > Polyacrylamide